Standard width is 1.5ft but 1 ft width is available upon request. Just let us know after you've purchased the product. Square footage may be covered by multiple mats (units).
US Floor Heating is dedicated to bringing you the unbelievable comfort of being warmed from underneath by radiant floor heat. The warmth from radiant floor heat warms your feet and legs then naturally rises to make the entire room comfy and cozy. The Netmats from US Floor Heating are easy to install under any type of flooring.
US Floor Heating's underfloor flexible fiberglass radiant heating mesh is a specially modeled weave of protected resistance cable which is installed and sealed under your flooring. The system operates on the principle of electrical resistance with cables from Du Pont.
Details:
Flexible fiberglass arranges the heating cables for simple installation.
High quality resistance wires are woven into 1' or 1.5' wide mats.
The spacing of the wires is 3.2 inches apart. The bottom of the fiberglass mesh is adhesive and sticks to the surface of the sub-floor during installation.
Attached to each end of the resistance wire are non-heating non-resistive wires. These cold leads are 15 ft long and connect to a floor thermostat.
About NetMat: US Floor Heating's NetMat is Self-adhesive, making for an easier installation, and there is need for Thin Set layer.
U.S. Floor Heating's NetMat radiant heat system is designed to be a do it yourself radiant floor heating system.
Thin 1/8 in. cable thickness will not raise floor height which means you can enjoy radiant floor heat even if your ceilings are low.
US Floor Heating's NetMat radiant floor heat system heats rooms of any shape or size.
The fiberglass mesh protects the integrity of the radiant floor heating cables.
The fiberglass mesh also stabilizes the floor covering.
Price:
Click here to buy from Amazon
No comments:
Post a Comment