Tuesday, July 5, 2011

Business plan: plan of heating surfaces of natural stone carpet

Carpet of natural stone are specially designed for use on any type of floor heating. However, it must be dry and free of dust. All the old glue should be deleted. The ground temperature must be at least 12NC.

Concrete floors and concrete bound

Establish a natural stone mat on the floor of concrete or cement bound generally is not a problem for the training of personnel, provided that the word is the standard of quality required. This means that it must be the same and free chips. Informed so as to avoid any contraction/expansion support pillars is the inclusion of narrowing NET, 6-150 mm in diameter in the stratum of sand/cement. You can usually arrange this in advance with the contractor.

When the sand/cement floor is already in place, a flexible membrane can be used to offset any reduction in support pillars and prevent cracking. The pillars of support will be sufficiently hardened and dried after 28 days the carpet of natural stone. The pillars of support, the ABC can be applied and the carpet of natural stone, thrown in a day or two.

Tiled floors and marked

Flagged floors and tiles are usually not necessary to delete.  Loose tiles or joints, however, should be deleted. The first day, a primer of special tiles to be applied to ensure maximum adherence. The second day, when he put the natural gravel floor is nearly level bumps in the pavement to mosaic.  Keep in mind that marked the terracotta floors and still require an additional amount of natural material.

Anhydrite floors

These stories should still all be smooth in the first place.  A plan of anhydrite, must be a special epoxy primer.

Wood floors under-

In the case of wooden floors, the movement of the supporting pillars is interrupted.  This is accomplished through the establishment of panels, waterproof adhesive side to the other with a gap of 3 mm and ranges of the lives of 25 cm. If you want, you can present this same floor heating.  You will then need to a layer of so-called "scape" under the wooden floor can be applied to obtain an Association for the natural stone carpet.

Underfloor heating

It is not strictly necessary underfloor heating. Carpet of natural stone cold feel much less of a mosaic floor, for example. For maximum comfort, however, can certainly be installed in combination with floor heating mats of natural stone in a flexible coating.  Underfloor heating must be separated from the concrete below. It is recommended that a layer of insulation or foil Builder to apply on the concrete. The children are surrounded by a border to compensate for any network of extension of sand/cement low is truncated to fit.

The layer of sand/cement must be at least 5 cm thick and takeoff for wiring PSY.  Cutting into the layer of sand/cement floor heating will weaken, and responsible to cracking.  In this case, a pliable layer of sand/cement be used to reduce the risk of cracking.  To avoid cuts in low sand/cement, a system of electric heating elements very fine an EP would be good idea.

Benefits for commercial floors

Carpet of natural stone is attractive natural flooring that soon became popular throughout the world. Has advantages compared to other floors and is available in a wide variety of colors. It is particularly suitable for public or commercial use for several reasons: it has a duration of more than 20 years, is resistant to place and easy to clean and maintain. Other advantages of acoustic insulation mats natural stone floor and the dissemination of his ability to stop the fire between distinct areas. The surface is resilient and anti-slip coating consistency is very valuable for public buildings, where security is that it can be a matter of law. It is also appropriate floors surround areas of sauna and swimming pool.

No comments:

Post a Comment